Swap Floppy Drive Default: Test jumper This jumper is for testing purposes only. TXT, or something similar. Installation Quick Installation Table This chapter explains how to successfully install the mainboard into a computer case and build a working system. Before you Begin Provides advice on choosing a case, avoiding static electricity damage, and setting jumpers. If you are running Windows with Autoplay enabled, the opening screen of the CD appears automatically. It’s a community-based project which helps to repair anything.

Uploader: Akijas
Date Added: 19 August 2013
File Size: 43.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 90254
Price: Free* [*Free Regsitration Required]

Setup If you have installed password protection, this item defines if the password is required at system start up, or if it is only required when a user tries to enter the Setup Utility.

If your system is not functioning correctly, try installing the fail-safe defaults as a first step in getting your system working properly again. souund

After you have connected the power supply and the cooling fans, connect the case switches and indicators to the PANEL1 connectors. The first time you start the system, immediately enter the setup system and make the appropriate settings. If you are running Windows NT, shut down your computer and boot from a DOS diskette temporarily in order to run the flash memory utility.

The installation procedure is as follows: Leave this item at the default value. Preparing The Mainboard Preparing the Mainboard Mainboard Guide Use the following illustration and m7127c to identify the components on your mainboard.


The main menu of the Setup Utility shows a list of the options that are available.

Matsonic MS7102C (MS7192SM), MS7112C, MS7117C, MS7127C Free Driver Download

Software The software for this mainboard siund stored in the MSC folder. After the POST routines are completed, the following message appears: User Define This item acts like a master switch for the power-saving modes and hard disk timeouts. A green keyboard is not required. These circuits and chips sm7127c sensitive and can be permanently damaged by static discharge. Ensure that your case supports all the features required. Reorient or relocate the receiving antenna.

Matsonic MSC driver – Matsonic Sound Card Drivers –

In a software power down, the system can be resumed by Wake Up Alarms. In a software power down, the system can be resumed by Wake Up Alarms. This program is available for: This fully programmable firmware enhances the system features and allows users to set such items as power management, CPU and memory timing, and modem wake-up alarms.

Disabled Enables or disables Sound Blaster function. Enabled Most processors that can be installed in this system use external level 2 L2 cache memory to improve performance.

Installation Use the Installation Chapter to learn how to install the main- board and get your system up and running. Generally, you should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware.

Generally, you should leave the items on this page at their default osund unless you are very familiar with the technical specifications of your system ssound. The disk drive software monitors the internal per- formance of the motors, media, heads, and electronics of the drive. Ensure too that you are installing the mainboard into a suitable case.


Mainboard msc Installation Notes Refer to your operating system handbook for instructions on in- stalling Linux drivers.

Solve Matsonic MSE problem

After powering up the system, ensure that the changes have taken effect. The processor pin-1 corner is beveled. We sounv recommend that you do not overclock the mainboard to run processors or other components faster than their rated speed.

On the CPU socket, pull the locking lever away from the socket to unhook it and then raise the locking lever to the upright position. Yes If you are running a system with no floppy drive and using Windows 95, select Yes for this item to ensure compatibility with the Windows 95 logo certification.

Optimized Defaults This menu enables you to set the following items: Standard This field is available if the Onboard Serial Port 2 field is set to any op- tion but Disabled. When installing a CPU heatsink and. Install ms712c hard disk drive into the drive cage in your system case.