Click the software you want to install. You may need to clear the CMOS memory if the settings in the Setup Utility are incorrect that prevents your motherboard from operating. If there is a cooling fan installed in the system chassis, connect the cable from the cooling fan to the SYSFAN1 fan power connector on the motherboard. Use the cable provided to connect the drives to the floppy disk drive connector FDC1. Click the ReadMe to bring up a screen, and then click the Install Path at the bottom of the screen.

Uploader: Akinosho
Date Added: 24 February 2011
File Size: 48.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 70288
Price: Free* [*Free Regsitration Required]

On the motherboard, locate the 4-pin connector CD1. The first jack is for stereo Line-In signal. If the password has been installed, Installed displays. Installing Memory Modules This motherboard accommodates two pin 2. I Static Electricity Precautions Use this item to enable or disable the onboard floppy disk drive interface. Va socket latches are levered upwards and latch on to the edges of the DIMM. Click the Next button to proceed.

Any changes can affect the operation of your computer. If you enable spread spectrum, it can significantly reduce the EMI ElectroMagnetic Interference generated by the system.

MG VC | Pcchips MG C Socket A Motherboard

Locate the infrared port IR1 connector on the motherboard. You set this value to No to free up an IRQ. Package Contents Your motherboard package contains the following items: If you have two devices on the cable, one must be Master and one must be Slave.


Press F1 to display a screen describing all key functions.

When choosing a processor, consider the performance requirements of the system. Inspect this motherboard whether there are any damages to components and connectors on the board. Therefore, it might happen under Windows XP that a dialogue box shown as below pop out warning you this software vha not passed Windows Logo testing to verify its compatibility with Windows XP.

PCCHIPS M863G – 5.1A – motherboard – micro ATX – AMD Athlon XP 2800+ – Socket A – SiS741GX

Neither this manual, nor any of the material contained herein, may be reproduced without the express written consent of the manufacturer. When this item is enabled, it automatically detects and shows clock and frequency of the DRAM memory installed in your system; when disabled, it can adjust clock and frequency of the DRAM memory. Select the items that you want to setup by clicking on it the default options are recommended.

Holding down the Page Up key also clears the setup information. See this chapter for information about locating JP2 and the setting options.

Remove the blanking plate of the slot from the system chassis. The second jack is for stereo LineOut signal. Unhook the locking lever of the CPU socket.


PC Chip M863G M 863G Motherboard AMD socket A 462 PCI Lan VGA USB Sound DDR RAM

You must use an ATX power supply in order to use this feature. The board is a Micro ATX size motherboard. Infrared Port The infrared port allows the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, Personal Digital Assistants PDAsand other computers.

Align the memory module with the socket. You may need to clear the CMOS memory if the settings in the Setup Utility are incorrect that prevents your motherboard from operating.

The ReadMe brings you to the Install Path where you can find out path names of software driver. Install your drives and connect power from the system power supply. This item shows frequency of the CPU installed in your system.

An Auto Setup screen automatically pops out, and then you can go on the auto-installing or manual installation depending on your operating system. We recommend you to leave this item at the default value.